catalog

КОНЕНнг-HF (J-H(St)HU-PF) Communication and alarm cable, shielded, twisted pair, halogen-free

КОНЕНнг-HF (J-H(St)HU-PF)
icon_red_1

Stability during single burning

icon_red_2

Stability when burning in a bundle

icon_red_3

Halogen-free

icon_red_5

Resistant to electrical influences-shielded

FIELD OF APPLICATION

  • Alarm systems, access control systems, management, control, communication and telecommunication systems
  • For the transmission of low-power electrical signals
  • For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas

ADVANTAGES

  • Shields protect against electromagnetic waves and absorb external electromagnetic signals
  • The wires have been tested for use outside the hermetic zone in cable structures of NPP premises, in systems of classes 3, 4 according to NP 306.2.141-2008
  • Additional versions: armoring, hydrophobicity, oil resistance

CONSTRUCTION

Resin

Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1

Insulation

halogen-free composition

Outer shell

halogen-free red composition

Number of cores

1÷61х2

Screen

synthetic film foiled with aluminum + grounding conductor

Screen 1

synthetic film foiled with aluminum + grounding conductor

Screen 2

shielded pairs

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,51
110

0,8
36

1,05
24,5

1,13
18,1

1,38
12,1

1,78
7,41

Temperature range

-30˚С to +70˚С

Test voltage

1500 W

Operating voltage

300 W

Electrical resistance of insulation

100 megohms/km

Minimum bending radius

10 х D

Color identification of cores

DSTU IEC 60189-2

Electrical capacity

100 pF/m

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Toxicity - p. 4.3 DSTU 4809

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosive activity - clause 4.6 of DSTU 4809. p.4.6 DSTU 4809, DSTU EN 60754-2

TABLE OF NOMENCLATURES

Article no. Number of cores and
cross section mm2
Maximum
outer diameter
Mass of copper Mass.
10304901 1х2х0,4 4.4 3.50 18
10304902 2х2х0,4 6.9 5.89 35
10304903 3х2х0,4 7.2 8.27 44
10304904 4х2х0,4 7.4 10.66 53
10304905 5х2х0,4 8.5 13.04 67
10304906 6х2х0,4 9.6 15.43 76
10304907 8х2х0,4 12.7 20.20 92
10304908 10х2х0,4 15.3 24.97 116
10304909 14х2х0,4 16.6 29.74 133
10304910 20х2х0,4 22.1 48.82 191
10304911 1х2х0,51 4.6 4.99 21
10304912 2х2х0,51 7.3 8.87 43
10304913 3х2х0,51 7.7 12.75 56
10304914 4х2х0,51 8.0 16.62 67
10304915 5х2х0,51 9.0 20.50 82
10304916 6х2х0,51 10.3 24.38 95
10304917 8х2х0,51 13.8 32.13 119
10304918 10х2х0,51 16.6 39.89 150
10304919 14х2х0,51 18.1 47.64 173
10304920 20х2х0,51 24.1 78.66 254
10304921 1х2х0,8 5.7 10.66 33
10304922 2х2х0,8 9.3 20.20 64
10304923 3х2х0,8 9.8 29.74 85
10304924 4х2х0,8 10.1 39.28 104
10304925 5х2х0,8 11.4 48.82 128
10304926 6х2х0,8 13.2 58.35 148
10304927 8х2х0,8 17.7 77.43 184
10304928 10х2х0,8 21.6 96.51 232
10304929 14х2х0,8 23.5 115.59 270
10304930 20х2х0,8 31.7 191.91 410
10304931 1х2х1,05 6.3 17.55 44
10304932 2х2х1,05 10.5 33.98 87
10304933 3х2х1,05 10.9 50.42 114
10304934 4х2х1,05 11.4 66.85 146
10304935 5х2х1,05 13.1 83.28 184
10304936 6х2х1,05 15.1 99.72 214
10304937 8х2х1,05 20.6 132.58 274
10304938 10х2х1,05 24.5 165.45 338
10304939 14х2х1,05 27.4 198.32 402
10304940 20х2х1,05 36.9 329.79 617
10304941 1х2х1,38 7.5 29.50 64
10304942 2х2х1,38 12.7 57.89 127
10304943 3х2х1,38 13.6 86.28 172
10304944 4х2х1,38 13.7 114.66 216
10304945 5х2х1,38 16.6 143.05 270
10304946 6х2х1,38 18.3 171.43 321
10304947 8х2х1,38 24.9 228.21 406
10304948 10х2х1,38 30.4 284.98 508
10304949 14х2х1,38 33.2 341.75 596
10304950 20х2х1,38 45.0 568.84 926

similar products