catalog

КОНЕ1Нг-HF (J-HHU-PIMF) Communication and alarm cable, shielded, twisted pair, halogen-free

КОНЕ1Нг-HF (J-HHU-PIMF)
icon_red_1

Stability during single burning

icon_red_2

Stability when burning in a bundle

icon_red_3

Halogen-free

icon_red_5

Resistant to electrical influences-shielded

FIELD OF APPLICATION

  • Alarm systems, access control systems, management, control, communication and telecommunication systems
  • For the transmission of low-power electrical signals
  • For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas

ADVANTAGES

  • Shields protect against electromagnetic waves and absorb external electromagnetic signals
  • The wires have been tested for use outside the hermetic zone in cable structures of NPP premises, in systems of classes 3, 4 according to NP 306.2.141-2008
  • Additional versions: armoring, hydrophobicity, oil resistance

CONSTRUCTION

Resin

Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1

Insulation

halogen-free composition

Outer shell

halogen-free red composition

Number of cores

1÷61х2

Screen

Synthetic film foiled with aluminum + grounding conductor

Screen 1

shielded pairs

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,51
110

0,8
36

1,05
24,5

1,13
18,1

1,38
12,1

1,78
7,41

Temperature range

-30˚С to +70˚С

Test voltage

1500 W

Operating voltage

300 W

Electrical resistance of insulation

100 megohms/km

Minimum bending radius

10 х D

Color identification of cores

DSTU IEC 60189-2

Electrical capacity

100 pF/m

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosive activity - clause 4.6 of DSTU 4809. p.4.6 DSTU 4809, DSTU EN 60754-2

TABLE OF NOMENCLATURES

Article no. Number of cores and
cross section mm2
Maximum
outer diameter
Mass of copper Mass.
10305901 1х2х0,4 4.4 3.50 18
10305902 2х2х0,4 6.9 5.89 35
10305903 3х2х0,4 7.2 8.27 44
10305904 4х2х0,4 7.4 10.66 53
10305905 5х2х0,4 8.5 13.04 67
10305906 6х2х0,4 9.6 15.43 76
10305907 8х2х0,4 12.7 20.20 92
10305908 10х2х0,4 15.3 24.97 116
10305909 14х2х0,4 16.6 29.74 133
10305910 20х2х0,4 22.1 48.82 191
10305911 1х2х0,51 4.6 4.99 21
10305912 2х2х0,51 7.3 8.87 43
10305913 3х2х0,51 7.7 12.75 56
10305914 4х2х0,51 8.0 16.62 67
10305915 5х2х0,51 9.0 20.50 82
10305916 6х2х0,51 10.3 24.38 95
10305917 8х2х0,51 13.8 32.13 119
10305918 10х2х0,51 16.6 39.89 150
10305919 14х2х0,51 18.1 47.64 173
10305920 20х2х0,51 24.1 78.66 254
10305921 1х2х0,8 5.7 10.66 33
10305922 2х2х0,8 9.3 20.20 64
10305923 3х2х0,8 9.8 29.74 85
10305924 4х2х0,8 10.1 39.28 104
10305925 5х2х0,8 11.4 48.82 128
10305926 6х2х0,8 13.2 58.35 148
10305927 8х2х0,8 17.7 77.43 184
10305928 10х2х0,8 21.6 96.51 232
10305929 14х2х0,8 23.5 115.59 270
10305930 20х2х0,8 31.7 191.91 410
10305931 1х2х1,05 6.3 17.55 44
10305932 2х2х1,05 10.5 33.98 87
10305933 3х2х1,05 10.9 50.42 114
10305934 4х2х1,05 11.4 66.85 146
10305935 5х2х1,05 13.1 83.28 184
10305936 6х2х1,05 15.1 99.72 214
10305937 8х2х1,05 20.6 132.58 274
10305938 10х2х1,05 24.5 165.45 338
10305939 14х2х1,05 27.4 198.32 402
10305940 20х2х1,05 36.9 329.79 617
10305941 1х2х1,38 7.5 29.50 64
10305942 2х2х1,38 12.7 57.89 127
10305943 3х2х1,38 13.6 86.28 172
10305944 4х2х1,38 13.7 114.66 216
10305945 5х2х1,38 16.6 143.05 270
10305946 6х2х1,38 18.3 171.43 321
10305947 8х2х1,38 24.9 228.21 406
10305948 10х2х1,38 30.4 284.98 508
10305949 14х2х1,38 33.2 341.75 596
10305950 20х2х1,38 45.0 568.84 926

similar products