UNIMATIC® BUS L2 Symmetrical interface cable for BUS systems, shielded
Stability during single burning
Resistant to electrical influences-shielded
FIELD OF APPLICATION
- They are used in production automation, control, and energy systems to connect components of L2-BUS systems, in networks operating under such standards as Profibus L2, F.I.P., etc.
ADVANTAGES
- High data transfer rate
- High degree of protection against electromagnetic fields
- For stationary installation
CONSTRUCTION
|
Resin |
Copper conductors in accordance with the requirements of DSTU EN 60228, flexibility class 1 |
|
Insulation |
Polyethylene foam |
|
Outer shell |
Polyvinyl chloride plastic of gray or purple color |
|
Number of cores |
2 |
|
Screen 1 |
Synthetic aluminum foil tape |
|
Screen 2 |
Braid made of tinned copper wires |
|
Filling in |
2 filling cores |
TECHNICAL CHARACTERISTICS
Electrical resistance depending on the nominal diameter of the core, not more than:
mm
Ohm/km
0.64 (22AWG)
55
|
Temperature range: |
from -40˚С to +70˚С |
|
Test voltage |
1500 W |
|
Operating voltage |
300/500 W |
|
Electrical resistance of insulation |
500 MOhm/km |
|
Minimum bending radius |
7,5 х D |
|
Color identification of cores |
red, green |
|
Electrical capacity |
30 pF/m |
|
Wave resistance |
150±10 ohms |
COMPLIANCE / STANDARDS
Resistance to single combustion, DSTU EN 60332-1-2
TABLE OF NOMENCLATURES
| Article no. | Number of cores and cross section mm2 |
Maximum outer diameter |
Mass of copper | Mass. |
|---|---|---|---|---|
| 30400201 | 1х2х0,64 | 8,3 | 25,7 | 73 |
