ПСРкН FRHF FE180/Eк90 (J-HXH-FE180) Communication and alarm wires, fire resistant

Stability during single burning

Stability when burning in a bundle

Halogen-free

FIELD OF APPLICATION

Alarm systems, access control systems, control, monitoring, communication and telecommunication systems, with increased requirements for their fire resistance
For the transmission of low-power electrical signals
For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas, areas with a high concentration of people

ADVANTAGES

Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
It does not emit corrosive gaseous products in case of fire. gaseous products, prevents possible damage to electronic equipment
The wires are tested for laying outside the hermetic zone in cable structures and NPP premises in systems of classes: 2, 3, 4 according to the classification of NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1
Insulation	Organosilicon rubber
Outer shell	Halogen-free composition in orange color
Number of cores	2, 4, 6, 8, 10, 12÷61

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,5
110

0,8
36

1,05
24,5

1,13
18,1

1,38
12,1

1,78
7,41


Temperature range	-30˚С to +70˚С
Test voltage	1000 W
Operating voltage	300 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	10 х D
Color identification of cores	DSTU IEC 60304

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flame with a temperature of at least 750˚C - 4.8 DSTU 4809, DSTU IEC 60331-. 23.

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
10100501	2х0,4	4.3	2.3	14
10100502	4х0,4	5.6	4.61	22
10100503	6х0,4	6.0	6.91	32
10100504	8х0,4	7.3	9.22	39
10100505	10х0,4	7.8	11.52	47
10100506	12х0,4	8.0	13.82	57
10100507	2х0,5	4.5	3.6	18
10100508	4х0,5	6.1	7.2	28
10100509	6х0,5	6.5	10.8	41
10100510	8х0,5	7.8	14.4	51
10100511	10х0,5	8.3	18	62
10100512	12х0,5	8.5	21.6	75
10100513	2х0,8	6.1	9.22	34
10100514	4х0,8	7.8	18.43	53
10100515	6х0,8	8.5	27.65	76
10100516	8х0,8	10.1	36.86	95
10100517	10х0,8	10.8	46.08	118
10100518	12х0,8	11	55.29	141
10100519	2х1,05	6.8	15.88	45
10100520	4х1,05	8.6	31.75	73
10100521	6х1,05	9.4	47.63	106
10100522	8х1,05	11.3	63.5	134
10100523	10х1,05	12.0	79.38	166
10100524	12х1,05	12.4	95.25	201
10100525	2х1,13	7.27	18.39	51
10100526	4х1,13	8.4	36.77	85
10100527	6х1,13	10.15	55.16	122
10100528	8х1,13	10.99	73.55	154
10100529	10х1,13	13.04	91.93	194
10100530	12х1,13	13.69	110.32	231
10100531	2х1,38	8.1	27.42	67
10100532	4х1,38	9.38	54.84	112
10100533	6х1,38	11.34	82.27	162
10100534	8х1,38	12.28	109.69	207
10100535	10х1,38	14.58	137.11	259
10100536	12х1,38	15.28	164.53	309
10100537	2х1,78	9.36	45.62	96
10100538	4х1,78	10.88	91.25	165
10100539	6х1,78	13.18	136.87	239
10100540	8х1,78	14.29	182.49	307
10100541	10х1,78	17.00	228.12	385
10100542	12х1,78	17.78	273.74	458