КОРкН FRHF FE180/Eк30 (J-HXH-PF FE180) Communication and alarm cable, twisted pair, fire resistant

Stability during single burning

Stability when burning in a bundle

Halogen-free

FIELD OF APPLICATION

Alarm systems, access control systems, management, control, communication and telecommunication systems
For the transmission of low-power electrical signals
For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas

ADVANTAGES

Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
Does not emit corrosive gaseous products in fire conditions gaseous products
The cables are tested for laying outside the hermetic zone in cable structures and NPP premises in systems of classes 2, 3, 4 according to NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1
Insulation	Organosilicon rubber
Outer shell	Orange halogen-free polymer composition
Number of cores	1÷61х2

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,5
110

0,8
36

1,05
24,5

1,13
18,1

1,38
12,1

1,78
7,41


Temperature range	-30˚С to +70˚С
Test voltage	1500 W
Operating voltage	300 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	10 х D
Color identification of cores	DSTU IEC 60304

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flames with a temperature of at least 750˚С - 4.8 DSTU 4809, DSTU IEC 60331-23

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
10302701	1х2х0,4	4.49	2.38	17
10302702	2х2х0,4	7.48	4.77	32
10302703	3х2х0,4	8.04	7.15	40
10302704	4х2х0,4	8.82	9.54	49
10302705	5х2х0,4	9.68	11.92	57
10302706	6х2х0,4	10.70	14.31	68
10302707	8х2х0,4	11.59	19.08	83
10302708	10х2х0,4	13.92	23.85	108
10302709	14х2х0,4	15.14	28.62	124
10302710	20х2х0,4	17.80	47.70	181
10302711	1х2х0,5	4.97	3.88	21
10302712	2х2х0,5	8.56	7.75	41
10302713	3х2х0,5	9.08	11.63	52
10302714	4х2х0,5	10.09	15.51	65
10302715	5х2х0,51	11.10	19.38	77
10302716	6х2х0,51	12.14	23.26	89
10302717	8х2х0,51	13.30	31.02	112
10302718	10х2х0,51	15.73	38.77	138
10302719	14х2х0,51	17.27	46.52	164
10302720	20х2х0,51	20.36	77.54	243
10302721	1х2х0,8	5.98	9.54	33
10302722	2х2х0,8	10.47	19.08	65
10302723	3х2х0,8	11.12	28.62	84
10302724	4х2х0,8	12.26	38.16	104
10302725	5х2х0,8	13.64	47.70	127
10302726	6х2х0,8	14.95	57.24	148
10302727	8х2х0,8	16.49	76.32	193
10302728	10х2х0,8	19.55	95.40	238
10302729	14х2х0,8	21.57	114.48	287
10302730	20х2х0,8	25.46	190.79	434
10302731	1х2х1,05	6.90	16.43	46
10302732	2х2х1,05	12.08	32.87	89
10302733	3х2х1,05	12.97	49.30	120
10302734	4х2х1,05	14.31	65.73	150
10302735	5х2х1,05	15.93	82.17	184
10302736	6х2х1,05	17.48	98.60	216
10302737	8х2х1,05	19.26	131.47	281
10302738	10х2х1,05	22.89	164.33	347
10302739	14х2х1,05	25.35	197.20	424
10302740	20х2х1,05	29.96	328.67	649
10302741	1х2х1,38	8.00	28.39	66
10302742	2х2х1,38	14.17	56.77	129
10302743	3х2х1,38	15.21	85.16	176
10302744	4х2х1,38	16.81	113.55	222
10302745	5х2х1,38	18.71	141.93	273
10302746	6х2х1,38	20.56	170.32	321
10302747	8х2х1,38	22.64	227.09	419
10302748	10х2х1,38	26.96	283.86	519
10302749	14х2х1,38	29.71	340.64	625
10302750	20х2х1,38	35.20	567.73	973