KORkEN FRHF FE180/Eк30 (J-HX(St)H-PF FE180) Communication and alarm cable, shielded, twisted pair, fire resistant

Stability during single burning

Stability when burning in a bundle

Halogen-free

Resistant to electrical influences-shielded

FIELD OF APPLICATION

Alarm systems, access control systems, management, control, communication and telecommunication systems
For the transmission of low-power electrical signals
For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas

ADVANTAGES

Shields protect against electromagnetic waves and absorb external electromagnetic signals
Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
Does not emit corrosive gaseous products in fire conditions gaseous products
The cables are tested for laying outside the hermetic zone in cable structures and NPP premises in systems of classes 2, 3, 4 according to NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1
Insulation	Organosilicon rubber
Outer shell	Halogen-free composition in orange color
Number of cores	1÷61х2
Screen	Synthetic film foiled with aluminum + grounding conductor

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,5
110

0,8
36

1,05
24,5

1,13
18,1

1,38
12,1

1,78
7,41


Temperature range	-30˚С to +70˚С
Test voltage	1500 W
Operating voltage	300 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	10 х D
Color identification of cores	DSTU IEC 60304

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - clause 4.3 of DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flames with a temperature of at least 750˚С - 4.8 DSTU 4809, DSTU IEC 60331-23

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
10307401	1х2х0,4	4.22	3.50	17
10307402	2х2х0,4	7.21	5.89	31
10307403	3х2х0,4	7.77	8.27	40
10307404	4х2х0,4	8.55	10.66	48
10307405	5х2х0,4	9.42	13.04	57
10307406	6х2х0,4	10.43	15.43	67
10307407	8х2х0,4	11.33	20.20	82
10307408	10х2х0,4	13.54	24.97	104
10307409	14х2х0,4	14.76	29.74	119
10307410	20х2х0,4	17.42	48.82	175
10307411	1х2х0,5	4.70	4.99	21
10307412	2х2х0,5	8.29	8.87	41
10307413	3х2х0,5	8.81	12.75	51
10307414	4х2х0,5	9.72	16.62	62
10307415	5х2х0,51	10.84	20.50	76
10307416	6х2х0,51	11.88	24.38	88
10307417	8х2х0,51	13.04	32.13	111
10307418	10х2х0,51	15.47	39.89	136
10307419	14х2х0,51	16.96	47.64	160
10307420	20х2х0,51	20.05	78.66	239
10307421	1х2х0,8	5.83	10.66	34
10307422	2х2х0,8	10.32	20.20	67
10307423	3х2х0,8	11.04	29.74	87
10307424	4х2х0,8	12.18	39.28	107
10307425	5х2х0,8	13.60	48.82	132
10307426	6х2х0,8	14.92	58.35	153
10307427	8х2х0,8	16.34	77.43	195
10307428	10х2х0,8	19.40	96.51	240
10307429	14х2х0,8	21.19	115.59	280
10307430	20х2х0,8	25.08	191.91	425
10307431	1х2х1,05	6.87	17.55	49
10307432	2х2х1,05	12.04	33.98	93
10307433	3х2х1,05	12.93	50.42	124
10307434	4х2х1,05	14.28	66.85	155
10307435	5х2х1,05	15.89	83.28	190
10307436	6х2х1,05	17.45	99.72	221
10307437	8х2х1,05	19.00	132.58	279
10307438	10х2х1,05	22.74	165.45	349
10307439	14х2х1,05	24.86	198.32	409
10307440	20х2х1,05	29.46	329.79	632
10307441	1х2х1,38	6.24	29.50	45
10307442	2х2х1,38	14.25	57.89	137
10307443	3х2х1,38	15.29	86.28	184
10307444	4х2х1,38	16.89	114.66	232
10307445	5х2х1,38	18.79	143.05	284
10307446	6х2х1,38	20.64	171.43	333
10307447	8х2х1,38	22.72	228.21	432
10307448	10х2х1,38	27.04	284.98	534
10307449	14х2х1,38	29.79	341.75	641
10307450	20х2х1,38	35.28	568.84	993