КМРкHс FRHF FE180/Eк90 (LIНХН-FE180) Power cable, flexible, fire-resistant

Stability during single burning

Stability when burning in a bundle

Halogen-free

FIELD OF APPLICATION

Construction, energy, industry, transportation facilities in evacuation, fire extinguishing, smoke removal, emergency power supply and fire warning systems
For fixed installation in power and lighting networks
In rooms with dry or humid environments under normal mechanical loads

ADVANTAGES

Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
Does not emit corrosive gaseous products in fire conditions gaseous products
The cables are used for laying outside the hermetic zone in cable structures and NPP premises in systems of classes 2, 3, 4 according to NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1 or 2
Insulation	Organosilicon rubber
Outer shell	Halogen-free composition in orange color
Number of cores	2, 3, 4, 5

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the rated area cross-section of the conductor, not more:

mm²
Ohm/km

0,5
36

1,0
18,1

1,5
12,1

2,5
7,41

4
4,61

6
3,08

10
1,83

16
1,15

25
0,727

35
0,524


Temperature range	-40˚C to +80˚C
Test voltage	2500 W
Operating voltage	300/500 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	12 х D
Color identification of cores	DSTU HD 308 S2

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flame with a temperature of at least 750 ° C - clause 4.6 of which is at least 750 ° C - 4.8 DSTU 4809, DSTU IEC 60331-21

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
11303801	2х0,5	6.6	9.21	38
11303802	3х0,5	6.9	13.82	48
11303803	4х0,5	7.7	18.43	62
11303804	5х0,5	8.3	23.03	74
11303805	2х0,75	7.2	13.82	49
11303806	3х0,75	7.4	20.73	64
11303807	4х0,75	8.3	27.64	81
11303808	5х0,75	9.1	34.55	97
11303809	2х1,0	8.1	18.43	59
11303810	3х1,0	8.6	27.64	77
11303811	4х1,0	9.6	36.85	102
11303812	5х1,0	10.4	46.06	122
11303813	2х1,5	8.7	27.64	74
11303814	3х1,5	9.2	41.46	98
11303815	4х1,5	10.4	55.28	133
11303816	5х1,5	11.4	69.10	162
11303817	2х2,5	10.1	46.06	101
11303818	3х2,5	11.0	69.10	142
11303819	4х2,5	12.2	92.13	186
11303820	5х2,5	13.4	115.16	225
11303821	2х4,0	12.2	73.70	152
11303822	3х4,0	13.2	110.55	204
11303823	4х4,0	14.6	147.41	260
11303824	5х4,0	16.6	184.26	333
11303825	2х6,0	13.9	110.55	199
11303826	3х6,0	14.7	165.83	273
11303827	4х6,0	16.8	221.11	367
11303828	5х6,0	18.5	276.39	446
11303829	2х10	16.8	184.26	311
11303830	3х10	18.9	276.39	429
11303831	4х10	20.3	368.51	551
11303832	5х10	23.3	460.64	691
11303833	2х16	19.6	294.81	444
11303834	3х16	21.3	442.22	623
11303835	4х16	24.5	589.62	824
11303836	5х16	27.2	737.03	1010
11303837	2х25	24.0	460.64	673
11303838	3х25	26.4	690.96	948
11303839	4х25	29.4	921.28	1231
11303840	5х25	33.2	1151.60	1523
11303841	2х35	27.5	644.90	886
11303842	3х35	29.5	967.35	1261
11303843	4х35	33.3	1289.80	1643
11303844	5х35	37.1	1612.25	2037