КМРкHс FRHF FE180/Eк30 (LIНХН-FE180) Power cable, flexible, fire-resistant

Stability during single burning

Stability when burning in a bundle

Halogen-free

FIELD OF APPLICATION

Construction, energy, industry, transportation facilities in evacuation, fire extinguishing, smoke removal, emergency power supply and fire warning systems
For fixed installation in power and lighting networks
In rooms with dry or humid environments under normal mechanical loads

ADVANTAGES

Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
Does not emit corrosive gaseous products in fire conditions gaseous products
The cables are used for laying outside the hermetic zone in cable structures and NPP premises in systems of classes 2, 3, 4 according to NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1 or 2
Insulation	Organosilicon rubber
Outer shell	Halogen-free composition in orange color
Number of cores	2, 3, 4, 5

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the rated area cross-section of the conductor, not more:

mm²
Ohm/km

0,5
36

1,0
18,1

1,5
12,1

2,5
7,41

4
4,61

6
3,08

10
1,83

16
1,15

25
0,727

35
0,524


Temperature range	-40˚C to +80˚C
Test voltage	2500 W
Operating voltage	300/500 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	12 х D
Color identification of cores	DSTU HD 308 S2

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flame with a temperature of at least 750 ° C - clause 4.6 of which is at least 750 ° C - 4.8 DSTU 4809, DSTU IEC 60331-21

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
11303701	2х0,5	6.6	9.21	38
11303702	3х0,5	6.9	13.82	48
11303703	4х0,5	7.7	18.43	62
11303704	5х0,5	8.3	23.03	74
11303705	2х0,75	7.2	13.82	49
11303706	3х0,75	7.4	20.73	64
11303707	4х0,75	8.3	27.64	81
11303708	5х0,75	9.1	34.55	97
11303709	2х1,0	8.1	18.43	59
11303710	3х1,0	8.6	27.64	77
11303711	4х1,0	9.6	36.85	102
11303712	5х1,0	10.4	46.06	122
11303713	2х1,5	8.7	27.64	74
11303714	3х1,5	9.2	41.46	98
11303715	4х1,5	10.4	55.28	133
11303716	5х1,5	11.4	69.10	162
11303717	2х2,5	10.1	46.06	101
11303718	3х2,5	11.0	69.10	142
11303719	4х2,5	12.2	92.13	186
11303720	5х2,5	13.4	115.16	225
11303721	2х4,0	12.2	73.70	152
11303722	3х4,0	13.2	110.55	204
11303723	4х4,0	14.6	147.41	260
11303724	5х4,0	16.6	184.26	333
11303725	2х6,0	13.9	110.55	199
11303726	3х6,0	14.7	165.83	273
11303727	4х6,0	16.8	221.11	367
11303728	5х6,0	18.5	276.39	446
11303729	2х10	16.8	184.26	311
11303730	3х10	18.9	276.39	429
11303731	4х10	20.3	368.51	551
11303732	5х10	23.3	460.64	691
11303733	2х16	19.6	294.81	444
11303734	3х16	21.3	442.22	623
11303735	4х16	24.5	589.62	824
11303736	5х16	27.2	737.03	1010
11303737	2х25	24.0	460.64	673
11303738	3х25	26.4	690.96	948
11303739	4х25	29.4	921.28	1231
11303740	5х25	33.2	1151.60	1523
11303741	2х35	27.5	644.90	886
11303742	3х35	29.5	967.35	1261
11303743	4х35	33.3	1289.80	1643
11303744	5х35	37.1	1612.25	2037