КОРкН FRHF FE180/Eк90 (J-HXH-PF FE180) Communication and alarm cable, twisted pair, fire resistant

Stability during single burning

Stability when burning in a bundle

Halogen-free

FIELD OF APPLICATION

Alarm systems, access control systems, management, control, communication and telecommunication systems
For the transmission of low-power electrical signals
For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas

ADVANTAGES

Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
Does not emit corrosive gaseous products in fire conditions gaseous products
The cables are tested for laying outside the hermetic zone in cable structures and NPP premises in systems of classes 2, 3, 4 according to NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1
Insulation	Organosilicon rubber
Outer shell	Halogen-free composition in orange color
Number of cores	1÷61х2

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,5
110

0,8
36

1,05
24,5

1,13
18,1

1,38
12,1

1,78
7,41


Temperature range	-30˚С to +70˚С
Test voltage	1500 W
Operating voltage	300 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	10 х D
Color identification of cores	DSTU IEC 60304

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flames with a temperature of at least 750˚С - 4.8 DSTU 4809, DSTU IEC 60331-23

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
10302801	1х2х0,4	4.49	2.38	17
10302802	2х2х0,4	7.48	4.77	32
10302803	3х2х0,4	8.04	7.15	40
10302804	4х2х0,4	8.82	9.54	49
10302805	5х2х0,4	9.68	11.92	57
10302806	6х2х0,4	10.70	14.31	68
10302807	8х2х0,4	11.59	19.08	83
10302808	10х2х0,4	13.92	23.85	108
10302809	14х2х0,4	15.14	28.62	124
10302810	20х2х0,4	17.80	47.70	181
10302811	1х2х0,5	4.97	3.88	21
10302812	2х2х0,5	8.56	7.75	41
10302813	3х2х0,5	9.08	11.63	52
10302814	4х2х0,5	10.09	15.51	65
10302815	5х2х0,51	11.10	19.38	77
10302816	6х2х0,51	12.14	23.26	89
10302817	8х2х0,51	13.30	31.02	112
10302818	10х2х0,51	15.73	38.77	138
10302819	14х2х0,51	17.27	46.52	164
10302820	20х2х0,51	20.36	77.54	243
10302821	1х2х0,8	5.98	9.54	33
10302822	2х2х0,8	10.47	19.08	65
10302823	3х2х0,8	11.12	28.62	84
10302824	4х2х0,8	12.26	38.16	104
10302825	5х2х0,8	13.64	47.70	127
10302826	6х2х0,8	14.95	57.24	148
10302827	8х2х0,8	16.49	76.32	193
10302828	10х2х0,8	19.55	95.40	238
10302829	14х2х0,8	21.57	114.48	287
10302830	20х2х0,8	25.46	190.79	434
10302831	1х2х1,05	6.90	16.43	46
10302832	2х2х1,05	12.08	32.87	89
10302833	3х2х1,05	12.97	49.30	120
10302834	4х2х1,05	14.31	65.73	150
10302835	5х2х1,05	15.93	82.17	184
10302836	6х2х1,05	17.48	98.60	216
10302837	8х2х1,05	19.26	131.47	281
10302838	10х2х1,05	22.89	164.33	347
10302839	14х2х1,05	25.35	197.20	424
10302840	20х2х1,05	29.96	328.67	649
10302841	1х2х1,38	8.00	28.39	66
10302842	2х2х1,38	14.17	56.77	129
10302843	3х2х1,38	15.21	85.16	176
10302844	4х2х1,38	16.81	113.55	222
10302845	5х2х1,38	18.71	141.93	273
10302846	6х2х1,38	20.56	170.32	321
10302847	8х2х1,38	22.64	227.09	419
10302848	10х2х1,38	26.96	283.86	519
10302849	14х2х1,38	29.71	340.64	625
10302850	20х2х1,38	35.20	567.73	973