ПСРкЕН FRHF FE180/Eк90 (J-HX(St)H-FE180) Communication and alarm wires, shielded, fireproof

Stability during single burning

Stability when burning in a bundle

Halogen-free

Resistant to electrical influences-shielded

FIELD OF APPLICATION

Alarm systems, access control systems, control, monitoring, communication and telecommunication systems, with increased requirements for their fire resistance
For the transmission of low-power electrical signals
For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas, areas with a high concentration of people

ADVANTAGES

Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
It does not emit corrosive gaseous products in case of fire. gaseous products, prevents possible damage to electronic equipment
Presence of "E" screen - protects information signal from electromagnetic fields, high quality of information transmission is preserved
The wires are tested for laying outside the hermetic zone in cable structures and NPP premises in systems of classes: 2, 3, 4 according to the classification of NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1
Insulation	Organosilicon rubber
Outer shell	Halogen-free composition in orange color
Number of cores	2, 4, 6, 8, 10, 12÷61
Screen	Synthetic film foiled with aluminum + grounding conductor

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,5
110

0,8
36

1,05
24,5

1,13
18,1

1,38
12,1

1,78
7,41


Temperature range	-30˚С to +70˚С
Test voltage	1000 W
Operating voltage	300 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	10 х D
Color identification of cores	DSTU IEC 60304

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809).

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flame with a temperature of at least 750˚С - 4.8 DSTU 4809, DSTU IEC 60331- 23

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
10101001	2х0,4	4.9	3.42	21
10101002	4х0,4	5.5	5.72	31
10101003	6х0,4	6.6	8.03	44
10101004	8х0,4	7.2	10.33	53
10101005	10х0,4	8.3	12.64	65
10101006	12х0,4	8.5	14.94	78
10101007	2х0,5	5.1	4.72	25
10101008	4х0,5	6.6	8.32	38
10101009	6х0,5	7.1	11.92	55
10101010	8х0,5	8.3	15.52	67
10101011	10х0,5	8.7	19.12	82
10101012	12х0,5	9	22.72	98
10101013	2х0,8	6.7	10.33	43
10101014	4х0,8	8.3	19.55	67
10101015	6х0,8	9.4	28.76	95
10101016	8х0,8	11	37.98	118
10101017	10х0,8	11.5	47.2	145
10101018	12х0,8	11.9	56.41	173
10101019	2х1,05	7.7	16.99	55
10101020	4х1,05	9.1	32.87	88
10101021	6х1,05	9.9	48.74	127
10101022	8х1,05	11.7	64.62	159
10101023	10х1,05	12.3	80.49	197
10101024	12х1,05	12.7	96.37	239
10101025	2х1,13	7.5	19.5	64
10101026	4х1,13	8.63	37.89	103
10101027	6х1,13	10.38	56.28	146
10101028	8х1,13	11.22	74.66	184
10101029	10х1,13	13.27	93.05	230
10101030	12х1,13	13.92	111.44	273
10101031	2х1,38	8.33	28.54	81
10101032	4х1,38	9.61	55.96	133
10101033	6х1,38	11.57	83.38	190
10101034	8х1,38	12.51	110.81	240
10101035	10х1,38	14.81	138.23	300
10101036	12х1,38	15.51	165.65	356
10101037	2х1,78	9.59	46.74	112
10101038	4х1,78	11.11	92.36	188
10101039	6х1,78	13.41	137.99	271
10101040	8х1,78	14.52	183.61	346
10101041	10х1,78	17.23	229.23	433
10101042	12х1,78	18.01	274.86	513