ПСРкЕН FRHF FE180/Eк30 (J-HX(St)H-FE180) Communication and alarm wires, shielded, fireproof

Stability during single burning

Stability when burning in a bundle

Halogen-free

Resistant to electrical influences-shielded

FIELD OF APPLICATION

Alarm systems, access control systems, control, monitoring, communication and telecommunication systems, with increased requirements for their fire resistance
For the transmission of low-power electrical signals
For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas, areas with a high concentration of people

ADVANTAGES

For installation of station equipment, for fixed laying inside buildings, constructions, in dry and damp rooms, rooms with high concentration of people
It does not emit corrosive gaseous products in case of fire. gaseous products, prevents possible damage to electronic equipment
The presence of the “E” shield protects the information signal from electromagnetic fields. High quality of information transmission is maintained from electromagnetic fields
The wires are tested for laying outside the hermetic zone in cable structures and NPP premises in systems of classes: 2, 3, 4 according to the classification of NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1
Insulation	Organosilicon rubber
Outer shell	Halogen-free composition in orange color
Number of cores	2, 4, 6, 8, 10, 12÷61
Screen	Synthetic film foiled with aluminum + grounding conductor

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,5
110

0,8
36

1,05
24,5

1,13
18,1

1,38
12,1

1,78
7,41


Temperature range	-30˚С to +70˚С
Test voltage	1000 W
Operating voltage	300 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	10 х D
Color identification of cores	DSTU IEC 60304

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - clause 4.3 of DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flame with a temperature of at least 750˚С - 4.8 DSTU 4809, DSTU IEC 60331- 23

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
10100901	2х0,4	4.9	3.42	18
10100902	4х0,4	5.5	5.72	26
10100903	6х0,4	6.6	8.03	37
10100904	8х0,4	7.2	10.33	44
10100905	10х0,4	8.3	12.64	53
10100906	12х0,4	8.5	14.94	63
10100907	2х0,5	5.1	4.72	22
10100908	4х0,5	6.6	8.32	32
10100909	6х0,5	7.1	11.92	46
10100910	8х0,5	8.3	15.52	56
10100911	10х0,5	8.7	19.12	68
10100912	12х0,5	9	22.72	81
10100913	2х0,8	6.7	10.33	39
10100914	4х0,8	8.3	19.55	59
10100915	6х0,8	9.4	28.76	83
10100916	8х0,8	11	37.98	102
10100917	10х0,8	11.5	47.2	126
10100918	12х0,8	11.9	56.41	149
10100919	2х1,05	7.7	16.99	50
10100920	4х1,05	9.1	32.87	80
10100921	6х1,05	9.9	48.74	113
10100922	8х1,05	11.7	64.62	142
10100923	10х1,05	12.3	80.49	175
10100924	12х1,05	12.7	96.37	211
10100925	2х1,13	7.5	19.5	57
10100926	4х1,13	8.63	37.89	91
10100927	6х1,13	10.38	56.28	130
10100928	8х1,13	11.22	74.66	163
10100929	10х1,13	13.27	93.05	203
10100930	12х1,13	13.92	111.44	241
10100931	2х1,38	8.33	28.54	73
10100932	4х1,38	9.61	55.96	120
10100933	6х1,38	11.57	83.38	171
10100934	8х1,38	12.51	110.81	216
10100935	10х1,38	14.81	138.23	270
10100936	12х1,38	15.51	165.65	320
10100937	2х1,78	9.59	46.74	103
10100938	4х1,78	11.11	92.36	173
10100939	6х1,78	13.41	137.99	249
10100940	8х1,78	14.52	183.61	317
10100941	10х1,78	17.23	229.23	397
10100942	12х1,78	18.01	274.86	471