КМРкHс FRHF FE180/Eк90 0,6/1 кВ (LIНХН-FE180) Power cable, flexible, fire-resistant

Stability during single burning

Stability when burning in a bundle

Halogen-free

FIELD OF APPLICATION

Construction, energy, industry, transportation facilities in evacuation, fire extinguishing, smoke removal, emergency power supply and fire warning systems
For fixed installation in power and lighting networks
In rooms with dry or humid environments under normal mechanical loads

ADVANTAGES

Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
Does not emit corrosive gaseous products in fire conditions gaseous products
The cables are used for laying outside the hermetic zone in cable structures and NPP premises in systems of classes 2, 3, 4 according to NP 306.2.141-2008

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1 or 2
Insulation	Organosilicon rubber
Outer shell	Halogen-free composition in orange color
Number of cores	2, 3, 4, 5

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the rated area cross-section of the conductor, not more:

mm²
Ohm/km

0,5
36

1,0
18,1

1,5
12,1

2,5
7,41

4
4,61

6
3,08

10
1,83

16
1,15

25
0,727

35
0,524


Temperature range	-40˚C to +80˚C
Test voltage	4000 W
Operating voltage	600/1000 W
Electrical resistance of insulation	100 megohms/km
Minimum bending radius	12 х D
Color identification of cores	DSTU HD 308 S2

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flame with a temperature of at least 750 ° C - clause 4.6 of which is at least 750 ° C - 4.8 DSTU 4809, DSTU IEC 60331-21

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
11304501	2х0,5	6.6	9.21	38
11304502	3х0,5	6.9	13.82	48
11304503	4х0,5	7.7	18.43	62
11304504	5х0,5	8.3	23.03	74
11304505	2х0,75	7.2	13.82	49
11304506	3х0,75	7.4	20.73	64
11304507	4х0,75	8.3	27.64	81
11304508	5х0,75	9.1	34.55	97
11304509	2х1,0	8.1	18.43	59
11304510	3х1,0	8.6	27.64	77
11304511	4х1,0	9.6	36.85	102
11304512	5х1,0	10.4	46.06	122
11304513	2х1,5	8.7	27.64	74
11304514	3х1,5	9.2	41.46	98
11304515	4х1,5	10.4	55.28	133
11304516	5х1,5	11.4	69.10	162
11304517	2х2,5	10.1	46.06	101
11304518	3х2,5	11.0	69.10	142
11304519	4х2,5	12.2	92.13	186
11304520	5х2,5	13.4	115.16	225
11304521	2х4,0	12.2	73.70	152
11304522	3х4,0	13.2	110.55	204
11304523	4х4,0	14.6	147.41	260
11304524	5х4,0	16.6	184.26	333
11304525	2х6,0	13.9	110.55	199
11304526	3х6,0	14.7	165.83	273
11304527	4х6,0	16.8	221.11	367
11304528	5х6,0	18.5	276.39	446
11304529	2х10	16.8	184.26	311
11304530	3х10	18.9	276.39	429
11304531	4х10	20.3	368.51	551
11304532	5х10	23.3	460.64	691
11304533	2х16	19.6	294.81	444
11304534	3х16	21.3	442.22	623
11304535	4х16	24.5	589.62	824
11304536	5х16	27.2	737.03	1010
11304537	2х25	24.0	460.64	673
11304538	3х25	26.4	690.96	948
11304539	4х25	29.4	921.28	1231
11304540	5х25	33.2	1151.60	1523
11304541	2х35	27.5	644.90	886
11304542	3х35	29.5	967.35	1261
11304543	4х35	33.3	1289.80	1643
11304544	5х35	37.1	1612.25	2037