КОРкНс FRHF FE180/Eк30 (НХН-FE180) Power cable, fire resistant
Stability during single burning
Stability when burning in a bundle
Halogen-free
FIELD OF APPLICATION
- Construction, energy, industry, transportation facilities in evacuation, fire extinguishing, smoke removal, emergency power supply and fire warning systems
- For fixed installation in power and lighting networks
- In rooms with dry or humid environments under normal mechanical loads
ADVANTAGES
- Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
- Does not emit corrosive gaseous products in fire conditions gaseous products
- The cables are used for laying outside the hermetic zone in cable structures and NPP premises in systems of classes 2, 3, 4 according to NP 306.2.141-2008
CONSTRUCTION
|
Resin |
Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1 or 2 |
|
Insulation |
Organosilicon rubber |
|
Outer shell |
Halogen-free composition in orange color |
|
Number of cores |
2, 3, 4, 5 |
TECHNICAL CHARACTERISTICS
Electrical resistance depending on the rated area cross-section of the conductor, not more:
mm²
Ohm/km
0,5
36
1,0
18,1
1,5
12,1
2,5
7,41
4
4,61
6
3,08
10
1,83
|
Temperature range |
-40˚C to +80˚C |
|
Test voltage |
2500 W |
|
Operating voltage |
300/500 W |
|
Electrical resistance of insulation |
100 megohms/km |
|
Minimum bending radius |
15 х D |
|
Color identification of cores |
DSTU HD 308 S2 |
COMPLIANCE / STANDARDS
Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2
Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22
Toxicity - p. 4.3 DSTU 4809
Smoke smoke - clause 4.4 of DSTU 4809.
Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.
Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.
Standard temperature conditions (clause 4.7 of DSTU 4809).
Integrity of circuits under conditions of exposure to flame with a temperature of at least 750 ° C - clause 4.6 of which is at least 750 ° C - 4.8 DSTU 4809, DSTU IEC 60331-21
TABLE OF NOMENCLATURES
| Article no. | Number of cores and cross section mm2 |
Maximum outer diameter |
Mass of copper | Mass. |
|---|---|---|---|---|
| 11303301 | 2х0,5 | 6.0 | 9.21 | 38 |
| 11303302 | 3х0,5 | 6.4 | 13.82 | 48 |
| 11303303 | 4х0,5 | 7.0 | 18.43 | 62 |
| 11303304 | 5х0,5 | 7.8 | 23.03 | 74 |
| 11303305 | 2х0,75 | 6.8 | 13.82 | 49 |
| 11303306 | 3х0,75 | 7.2 | 20.73 | 64 |
| 11303307 | 4х0,75 | 8.0 | 27.64 | 81 |
| 11303308 | 5х0,75 | 8.8 | 34.55 | 97 |
| 11303309 | 2х1,0 | 7.4 | 18.43 | 59 |
| 11303310 | 3х1,0 | 7.8 | 27.64 | 77 |
| 11303311 | 4х1,0 | 9.0 | 36.85 | 102 |
| 11303312 | 5х1,0 | 9.9 | 46.06 | 122 |
| 11303313 | 2х1,5 | 8.2 | 27.64 | 74 |
| 11303314 | 3х1,5 | 8.7 | 41.46 | 98 |
| 11303315 | 4х1,5 | 10.0 | 55.28 | 133 |
| 11303316 | 5х1,5 | 10.9 | 69.10 | 162 |
| 11303317 | 2х2,5 | 9.6 | 46.06 | 101 |
| 11303318 | 3х2,5 | 10.4 | 69.10 | 142 |
| 11303319 | 4х2,5 | 11.7 | 92.13 | 186 |
| 11303320 | 5х2,5 | 12.9 | 115.16 | 225 |
| 11303321 | 2х4,0 | 11.6 | 73.70 | 152 |
| 11303322 | 3х4,0 | 13.2 | 110.55 | 204 |
| 11303323 | 4Х4,0 | 14.6 | 147.41 | 260 |
| 11303324 | 5х4,0 | 16.6 | 184.26 | 333 |
| 11303325 | 2х6,0 | 13.1 | 110.55 | 199 |
| 11303326 | 3х6,0 | 14.6 | 165.83 | 273 |
| 11303327 | 4х6,0 | 16.8 | 221.11 | 367 |
| 11303328 | 5х6,0 | 18.5 | 276.39 | 446 |
