КОРкЕНк FRHF FE180/Eк30 (SL-НХ(St)Н FE180) Control cable, shielded, fireproof

Stability during single burning

Stability when burning in a bundle

Halogen-free

Resistant to electrical influences-shielded

FIELD OF APPLICATION

For stationary installation in automatic control and monitoring systems of power circuits
In rooms with dry or humid environments under normal mechanical loads

ADVANTAGES

The cables are tested for installation outside the hermetic zone in cable structures and NPP premises in systems of classes: 2, 3, 4 according to the classification of NP 306.2.141-2008
Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
The screen provides protection against electromagnetic waves

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1
Insulation	Organosilicon rubber
Outer shell	Orange halogen-free polymer composition
Number of cores	4, 5, 7, 10, 14, 19, 27, 37÷61
Screen	Synthetic film foiled with aluminum + grounding conductor.

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the rated area cross-section of the conductor, not more:

mm²
Ohm/km

0,5
36

1,0
18,1

1,5
12,1

2,5
7,41


Temperature range	-50˚С to +70˚С
Test voltage	2500 W
Operating voltage	300/500 W
Electrical resistance of insulation	20 MOhm/km
Minimum bending radius	15 х D
Color identification of cores	EN 50334

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flame with a temperature of at least 750 ° C - clause 4.6 of which is at least 750 ° C - 4.8 DSTU 4809, DSTU IEC 60331-21

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
11401101	2х0,5	7.6	10.33	49
11401102	3х0,5	8.0	14.94	60
11401103	4х0,5	8.7	19.54	72
11401104	5х0,5	10.0	24.15	97
11401105	7х0,5	10.8	33.36	120
11401106	10х0,5	13.4	47.18	162
11401107	14х0,5	14.4	65.61	205
11401108	19х0,5	15.9	88.64	259
11401109	27х0,5	18.9	125.49	348
11401110	37х0,5	21.5	171.55	470
11401111	2х0,75	8.3	14.94	59
11401112	3х0,75	8.7	21.85	73
11401113	4х0,75	10.0	28.76	102
11401114	5х0,75	10.8	35.67	120
11401115	7х0,75	11.7	49.48	150
11401116	10х0,75	14.6	70.21	205
11401117	14х0,75	15.8	97.85	261
11401118	19х0,75	17.5	132.40	333
11401119	27х0,75	21.3	187.68	471
11401120	37х0,75	23.7	256.77	612
11401121	2х1,0	8.8	19.54	69
11401122	3х1,0	9.9	28.76	100
11401123	4х1,0	10.7	37.97	121
11401124	5х1,0	11.6	47.18	143
11401125	7х1,0	12.6	65.61	180
11401126	10х1,0	15.7	93.25	247
11401127	14х1,0	17.0	130.10	319
11401128	19х1,0	18.9	176.16	409
11401129	27х1,0	23.0	249.86	579
11401130	37х1,0	25.7	341.99	756
11401131	2х1,5	10.0	28.76	97
11401132	3х1,5	10.6	42.57	122
11401133	4х1,5	11.5	56.39	149
11401134	5х1,5	12.5	70.21	177
11401135	7х1,5	13.5	97.85	227
11401136	10х1,5	17.0	139.31	313
11401137	14х1,5	18.5	194.59	409
11401138	19х1,5	21.0	263.68	548
11401139	27х1,5	25.0	374.24	750
11401140	37х1,5	28.4	512.43	1012
11401141	2х2,5	11.3	47.18	124
11401142	3х2,5	11.9	70.21	160
11401143	4х2,5	13.0	93.25	199
11401144	5х2,5	14.2	116.28	238
11401145	7х2,5	15.4	162.34	310
11401146	10х2,5	19.6	231.44	432
11401147	14х2,5	21.7	323.57	589
11401148	19х2,5	26.0	438.73	767
11401149	27х2,5	29.3	622.98	1083
11401150	37х2,5	32.8	853.30	1432
11401151	4х4,0	14.5	148.52	273
11401152	5х4,0	15.9	185.37	329
11401153	4х6,0	15.9	222.23	363
11401154	5х6,0	17.1	277.50	468