ALAY-net SF/UTP FR CAT.5 Network cable, shielded, twisted pair, fire resistant
Stability during single burning
Stability when burning in a bundle
Halogen-free
Resistant to electrical influences-shielded
FIELD OF APPLICATION
- At facilities with increased fire protection requirements
- For construction of structured cable systems
- Data transfer at speeds up to 100 Mbps
- ISDN, Ethernet (10Base-T), ATM-25/52/155 Мбіт/с, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Firewire 100 Mbit/s, PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), PoE++ (IEEE 802.3bt), HDBaseT, 1000BASE-T
ADVANTAGES
- Screens protect against electromagnetic interference
CONSTRUCTION
|
Resin |
Copper conductors in accordance with the requirements of DSTU EN 60228, flexibility class 1 |
|
Insulation |
Silicone rubber + polyethylene |
|
Outer shell |
Halogen-free composition in orange color |
|
Number of cores |
2х2 |
|
Inner shell |
Halogen-free composition |
|
Screen 1 |
Synthetic aluminum foil tape, grounding conductor |
|
Screen 2 |
Copper wire braid |
TECHNICAL CHARACTERISTICS
Electrical resistance depending on the rated area cross-section of the conductor, not more:
AWG
Ohm/km
24
96
|
Temperature range: |
from -30°C to +70°C |
|
Test voltage |
2500 W |
|
Operating voltage |
72 W |
|
Electrical resistance of insulation |
5 Gohm/km |
|
Minimum bending radius |
10 х D |
|
Color identification of cores |
DSTU IEC 61156-1 |
|
Electrical capacity |
56 pF/m |
|
Wave resistance |
110±10 ohms |
COMPLIANCE / STANDARDS
DSTU ISO/IEC 11801
DSTU IEC 61156-2
Resistance to single combustion, DSTU EN 60332-1-2
Resistance to burning in a bundle, DSTU EN 60332-3-22 (cat. A)
Toxicity (low-hazardous - group T1);
Low smoke emission during combustion, DSTU EN 61034-2;
Corrosivity of flue gases, DSTU EN 60754-2
Standard temperature conditions (class "Ek30").
TABLE OF NOMENCLATURES
| Article no. | Number of cores and cross section mm2 |
Maximum outer diameter |
Mass of copper | Mass. |
|---|---|---|---|---|
| 10201201 | 2х2х24AWG | 7,9 | 17,85 | 59 |
