catalog

ALAY-net F/FTP LSОH CAT. 6А Network cable, shielded, twisted pair, with low smoke and gas emission

ALAY-net F/FTP LSОH CAT. 6А
icon_red_1

Stability during single burning

FIELD OF APPLICATION

  • For construction of structured cable systems
  • Data transfer at speeds up to 100 Mbps
  • ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Firewire 100 Mbit/s, PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), PoE++ (IEEE 802.3bt), HDBaseT, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T

ADVANTAGES

  • The cables are tested for laying outside the hermetic zone in cable structures and premises of NPPs, in systems of classes 3, 4 according to the classification of NP 306.2.141-2008
  • Meet the requirements of the RoHS Directive
  • Version: for outdoor use, with cable
  • Screens protect against interference

CONSTRUCTION

Resin

Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1

Insulation

Polyethylene foam

Outer shell

halogen-free red composition

Number of cores

2х2, 4х2

Screen

Synthetic film foiled with aluminum + grounding conductor, steel wire braid

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,565
75

Temperature range

-30˚С to +70˚С

Test voltage

2500 W

Operating voltage

72 W

Electrical resistance of insulation

5 Gohm/km

Minimum bending radius

10 х D

Color identification of cores

DSTU IEC 61156-1

icon

Signal transmission characteristics

Frequency, MHz 1 4 10 16 20 31,25 62,5 100 250 500
Fading 2,1 3,8 5,9 7,5 8,4 10,5 15,0 19,1 31,3 45,3
NEXT, dB, not less 75,3 66,3 60,3 57,2 55,8 52,9 48,4 45,3 39,3 34,8
ELFEXT, dB, max. 68 56 48 43,9 42 38,1 32,1 28 20 14

Electrical capacity

56 pF/m

Wave impedance in the frequency range of 1-100 MHz

100±15 Ом

Wave impedance in the frequency range of 101-250 MHz

100±22 Ом

Wave impedance in the frequency range of 251-500 MHz

100±25 Ом

COMPLIANCE / STANDARDS

DSTU ISO/IEC 11801

DSTU IEC 61156-5

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2

TABLE OF NOMENCLATURES

Article no. Number of cores and
cross section mm2
Maximum
outer diameter
Mass of copper Mass.
60101901 2х2х0,57 7,72 12,72 48
60101902 4х2х0,57 7,72 24,31 62