КОРкЕНк FRHF FE180/Eк90 (SL-НХ(St)Н FE180) Control cable, shielded, fireproof

Stability during single burning

Stability when burning in a bundle

Halogen-free

Resistant to electrical influences-shielded

FIELD OF APPLICATION

For stationary installation in automatic control and monitoring systems of power circuits
In rooms with dry or humid environments under normal mechanical loads

ADVANTAGES

The cables are tested for installation outside the hermetic zone in cable structures and NPP premises in systems of classes: 2, 3, 4 according to the classification of NP 306.2.141-2008
Preservation of circuit integrity, under standard temperature conditions, from 30 to 90 minutes at temperatures from ~842˚C (Ek30) to ~1006˚C (Ek90)
The screen provides protection against electromagnetic waves

CONSTRUCTION

Resin	Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1
Insulation	Organosilicon rubber
Outer shell	Orange halogen-free polymer composition
Number of cores	4, 5, 7, 10, 14, 19, 27, 37÷61
Screen	Synthetic film foiled with aluminum + grounding conductor.

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the rated area cross-section of the conductor, not more:

mm²
Ohm/km

0,5
36

1,0
18,1

1,5
12,1

2,5
7,41


Temperature range	-50˚С to +70˚С
Test voltage	2500 W
Operating voltage	300/500 W
Electrical resistance of insulation	20 MOhm/km
Minimum bending radius	15 х D
Color identification of cores	EN 50334

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

Toxicity - p. 4.3 DSTU 4809.

Smoke smoke - clause 4.4 of DSTU 4809.

Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2.

Halogens and corrosivity - clause 4.6 of DSTU 4809, DSTU EN 60754-2.

Standard temperature conditions (clause 4.7 of DSTU 4809).

Integrity of circuits under conditions of exposure to flame with a temperature of at least 750 ° C - clause 4.6 of which is at least 750 ° C - 4.8 DSTU 4809, DSTU IEC 60331-21

TABLE OF NOMENCLATURES

Article no.	Number of cores and cross section mm2	Maximum outer diameter	Mass of copper	Mass.
11401201	2х0,5	7.6	10.33	49
11401202	3х0,5	8.0	14.94	60
11401203	4х0,5	8.7	19.54	72
11401204	5х0,5	10.0	24.15	97
11401205	7х0,5	10.8	33.36	120
11401206	10х0,5	13.4	47.18	162
11401207	14х0,5	14.4	65.61	205
11401208	19х0,5	15.9	88.64	259
11401209	27х0,5	18.9	125.49	348
11401210	37х0,5	21.5	171.55	470
11401211	2х0,75	8.3	14.94	59
11401212	3х0,75	8.7	21.85	73
11401213	4х0,75	10.0	28.76	102
11401214	5х0,75	10.8	35.67	120
11401215	7х0,75	11.7	49.48	150
11401216	10х0,75	14.6	70.21	205
11401217	14х0,75	15.8	97.85	261
11401218	19х0,75	17.5	132.40	333
11401219	27х0,75	21.3	187.68	471
11401220	37х0,75	23.7	256.77	612
11401221	2х1,0	8.8	19.54	69
11401222	3х1,0	9.9	28.76	100
11401223	4х1,0	10.7	37.97	121
11401224	5х1,0	11.6	47.18	143
11401225	7х1,0	12.6	65.61	180
11401226	10х1,0	15.7	93.25	247
11401227	14х1,0	17.0	130.10	319
11401228	19х1,0	18.9	176.16	409
11401229	27х1,0	23.0	249.86	579
11401230	37х1,0	25.7	341.99	756
11401231	2х1,5	10.0	28.76	97
11401232	3х1,5	10.6	42.57	122
11401233	4х1,5	11.5	56.39	149
11401234	5х1,5	12.5	70.21	177
11401235	7х1,5	13.5	97.85	227
11401236	10х1,5	17.0	139.31	313
11401237	14х1,5	18.5	194.59	409
11401238	19х1,5	21.0	263.68	548
11401239	27х1,5	25.0	374.24	750
11401240	37х1,5	28.4	512.43	1012
11401241	2х2,5	11.3	47.18	124
11401242	3х2,5	11.9	70.21	160
11401243	4х2,5	13.0	93.25	199
11401244	5х2,5	14.2	116.28	238
11401245	7х2,5	15.4	162.34	310
11401246	10х2,5	19.6	231.44	432
11401247	14х2,5	21.7	323.57	589
11401248	19х2,5	26.0	438.73	767
11401249	27х2,5	29.3	622.98	1083
11401250	37х2,5	32.8	853.30	1432
11401251	4х4,0	14.5	148.52	273
11401252	5х4,0	15.9	185.37	329
11401253	4х6,0	15.9	222.23	363
11401254	5х6,0	17.1	277.50	468