catalog

ПСВВ (J-YY) Communication and alarm wiring

ПСВВ (J-YY)
icon_red_1

Stability during single burning

FIELD OF APPLICATION

  • Alarm systems, access control systems, management, control, communication and telecommunication systems
  • For the transmission of low-power electrical signals
  • For installation of station equipment, for stationary installation inside buildings, structures, in dry and wet areas

ADVANTAGES

  • The wires are tested for use outside the hermetic zone in cable structures of NPP premises, in systems of classes 3, 4 according to NP 306.2.141-2008
  • Low cost, simple design, and long-term reliability.
  • Additional versions: armored, hydrophobic, oil resistant

CONSTRUCTION

Resin

Copper conductors, in accordance with the requirements of DSTU EN 60228, flexibility class 1

Insulation

Polyvinyl chloride plastic. For wires with indices: - "ng", "ng-LS" - polyvinyl chloride plastic of reduced fire hazard - "HF" - halogen-free composition

Outer shell

White polyvinyl chloride plastic. For wires with indices: - "ng" - polyvinyl chloride plastic of reduced fire hazard in red color - "ng-LS" - polyvinyl chloride plastic with low smoke emission in red or black color - "HF" - halogen-free composition in red color

Number of cores

2, 4, 6, 8, 10, 12÷61

TECHNICAL CHARACTERISTICS

Electrical resistance depending on the nominal diameter of the core, not more than:

mm
Ohm/km

0,4
160

0,5
10

0,8
36

1,05
24,5

1,13
18,1

1,78
7,41

Temperature range

from -50˚С to +70˚С

Test voltage

1000 W

Operating voltage

300 W

Electrical resistance of insulation

100 megohms/km

Minimum bending radius

10 х D

Color identification of cores

DSTU IEC 60304

COMPLIANCE / STANDARDS

Single combustion - clause 4.1 of DSTU 4809, DSTU EN 60332-1 -2

"ng" + Combustion in bundles - clause 4.2 of DSTU 4809, DSTU EN 60332-3-22

"ng-LS", "HF" + Toxicity - p. 4.3 DSTU 4809. Smoke smoke - clause 4.4 of DSTU 4809. Combustion smoke - clause 4.5 of DSTU 4809, DSTU EN 61034-2. Halogens and corrosive activity - clause 4.6 of DSTU 4809, DSTU EN 60754-2

TABLE OF NOMENCLATURES

Article no. Number of cores and
cross section mm2
Maximum
outer diameter
Mass of copper Mass.
10100101 2х0,4 4,3 2,30 13
10100102 4х0,4 5,6 4,61 21
10100103 6х0,4 6,0 6,91 28
10100104 8х0,4 7,3 9,22 37
10100105 10х0,4 7,8 11,52 45
10100106 12х0,4 8,0 55 13,82
10100107 2х0,5 4,5 3,60 15
10100108 4х0,5 6,1 7,20 26
10100109 6х0,5 6,5 10,8 35
10100110 8х0,5 7,8 14,40 45
10100111 10х0,5 8,3 18,00 55
10100112 12х0,5 8,5 21,60 66
10100113 2х0,8 6,1 9,22 26
10100114 4х0,8 7,8 18,43 42
10100115 6х0,8 8,5 27,65 61
10100116 8х0,8 10,1 36,86 77
10100117 10х0,8 10,8 46,08 94
10100118 12х0,8 11 55,29 114
10100119 2х1,05 6,8 15,88 35
10100120 4х1,05 8,6 31,75 59
10100121 6х1,05 9,4 47,63 86
10100122 8х1,05 11,3 110 63,50
10100123 10х1,05 12,0 79,38 136
10100124 12х1,05 12,4 95,25 166
10100125 2х1,13 7,27 18,39 44
10100126 4х1,13 8,40 36,77 73
10100127 6х1,13 10,15 55,16 106
10100128 8х1,13 10,99 73,55 135
10100129 10х1,13 13,04 91,93 170
10100130 12х1,13 13,69 110,32 204
10100131 2х1,38 8,10 18,39 56
10100132 4х1,38 9,38 96 36,77
10100133 6х1,38 11,34 55,16 139
10100134 8х1,38 12,28 73,55 179
10100135 10х1,38 14,58 91,93 225
10100136 12х1,38 15,28 110,32 270
10100137 2х1,78 9,36 45,62 82
10100138 4х1,78 10,88 91,25 147
10100139 6х1,78 13,18 136,87 215
10100140 8х1,78 14,29 182,49 277
10100141 10х1,78 17,00 228,12 348
10100142 12х1,78 17,78 273,74 416