ETHERMATIC® SF/UTP SPE – Single pair Ethernet Cable, shielded, twisted-pair cable
Stability during single burning
Resistant to electrical influences-shielded
FIELD OF APPLICATION
- For construction of structured cable systems
- Data transfer at speeds up to 1 Gbps
- Single-Pair-Ethernet 100Base-T1 відповідно до IEEE 802.3bw та 1000Base-T1 відповідно до IEEE 802.3bp
ADVANTAGES
- Reduced weight and installation space.
- A small bending radius and outer diameter are necessary for the connection to the fieldbus level.
- Single-ended, unshielded cables for simultaneous power and data transmission in low-power terminals.
- Screens protect against electromagnetic interference
CONSTRUCTION
|
Resin |
Copper conductors in accordance with the requirements of DSTU EN 60228, flexibility class 2 |
|
Insulation |
Polyethylene foam |
|
Outer shell |
Green polyvinyl chloride plastic |
|
Number of cores |
1х2 |
|
Screen 1 |
Synthetic aluminum foil tape, grounding conductor |
|
Screen 2 |
Copper wire braid |
|
Filling in |
2 cores of aggregate |
TECHNICAL CHARACTERISTICS
Electrical resistance depending on the rated area cross-section of the conductor, not more:
AWG
Ohm/km
26/7
95
|
Temperature range: |
-30˚С to +70˚С |
|
Test voltage |
2500 W |
|
Operating voltage |
72 W |
|
Electrical resistance of insulation |
5 Gohm/km |
|
Minimum bending radius |
10 х D |
|
Color identification of cores |
DSTU IEC 61156-1 |
|
Electrical capacity |
56 pF/m |
|
Wave resistance |
110±10 ohms |
COMPLIANCE / STANDARDS
DSTU ISO/IEC 11801
DSTU IEC 61156-5
Resistance to single combustion, DSTU EN 60332-1-2
TABLE OF NOMENCLATURES
| Article no. | Number of cores and cross section mm2 |
Maximum outer diameter |
Mass of copper | Mass. |
|---|---|---|---|---|
| 60104401 | 1х2х22/7AWG | 4,4 | 11,2 | 27 |
