H05VVH6-F Elevator cable
Stability during single burning
FIELD OF APPLICATION
- For use in passenger and freight elevators.
- For general use and special applications such as material handling equipment and overhead cranes.
ADVANTAGES
- Extremely small bending radius
- High flexibility
- Minimizes unused space
CONSTRUCTION
|
Resin |
Copper conductors are tinned in accordance with the requirements of DSTU EN 60228, flexibility class 5 |
|
Insulation |
Polyvinyl chloride plastic |
|
Outer shell |
Non-combustible polyvinyl chloride plastic |
|
Number of cores |
4÷24 |
TECHNICAL CHARACTERISTICS
Electrical resistance depending on the rated area cross-section of the conductor, not more:
mm²
Ohm/km
0,75
26
1
19,5
|
Temperature range: |
from -40˚С to +80˚С |
|
Test voltage |
2000 В |
|
Operating voltage |
300/500 W |
|
Electrical resistance of insulation |
11 kΩ/km at 70˚C |
|
Minimum bending radius |
10 х D |
|
Color identification of cores |
DSTU HD 308 |
|
Digital identification of cores |
EN 50334 |
COMPLIANCE / STANDARDS
Resistance to single combustion, DSTU EN 60332-1-2
TABLE OF NOMENCLATURES
| Article no. | Number of cores and cross section mm2 |
Maximum outer diameter |
Mass of copper | Mass. |
|---|---|---|---|---|
| 50100101 | 6х0,75 | 4х17,6 | 40.9 | 156 |
| 50100102 | 12х0,75 | 4х32,8 | 81.9 | 259 |
| 50100103 | 18х0,75 | 4х48 | 122.8 | 434 |
| 50100104 | 24х0,75 | 4х64 | 163.8 | 578 |
| 50100105 | 6х1 | 4,14х18,4 | 54.6 | 178 |
| 50100106 | 12х1 | 4,14х34,5 | 109.2 | 338 |
| 50100107 | 18х1 | 4,14х18,5 | 163.8 | 498 |
| 50100108 | 24х1 | 4,14х67,4 | 218.4 | 664 |
